CFR > Title 46 > Chapter I > Part 57 > § 57.06-3. Method of performing production testing
Current as of: Oct. 2009
(a) Except as otherwise specified in this section a test plate shall be attached to the shell plate on one end of the longitudinal joint of each vessel as shown in Figure 57.06-3, so that the edges of the test plate to be welded are a continuation of and duplication of the corresponding edges of the longitudinal joint. For attached test plates, the weld metal shall be deposited in the test plate welding groove continuously with the weld metal deposited in the groove of the longitudinal joint. As an alternate method, the marine inspector may permit the use of separate test plates, provided the same welding process, procedure, and technique employed in the fabrication of the longitudinal joint are used in welding the test plates.
(b) All test plates, whether attached to the shell or separate in accordance with paragraphs (a) and (d) of this section, shall be prepared from material of the same specification, thickness, and heat treatment and, for Class I-L and Class II-L vessels, the same heat as that of the vessel for which they are required. However, except when required to be from a specific heat, test plates may be prepared from material of a different product form, such as plate in lieu of a forging, provided the chemical composition is within the vessel material specification limits and the melting practice is the same.
(c) Test plates are not required for welded nozzle attachments.
(d) In the case of vessels having no longitudinal welded joints, at least one set of test plates shall be welded for each vessel, using the circumferential joint process, procedure and technique, except that the provisions of Sec. 57.06-2(a) shall also apply for Classes I and I-L vessels, and that the provisions of Sec. 57.06-2 (a) and (c) shall also apply for Classes II and II-L vessels. [GRAPHIC] [TIFF OMITTED] TC01FE91.030
Figure 57.06-3--(PW-53.2) Method of forming longitudinal test plates
(e) Test plates shall be made by the same welder producing the longitudinal and circumferential joints. If more than one welder is employed in the welding of the pressure vessel(s), the test plates shall be made by the welder designated by the marine inspector. The test plates shall be of the same thickness as the material being welded and shall be of sufficient size to provide two specimens of each type required, except that in the case of pressure vessels having no longitudinal seams, the test plate need be only of sufficient length to provide one set of test specimens, and if a retest is necessary, an additional set of test plates may be welded separately.________________________________________________________________________
State Laws: Watercraft| Alabama | Alabama Code > Title 33 > Chapter 5 - Registration And Operation Of Vessels | | Alabama Code > Title 33 > Chapter 6 - Discharge Of Litter And Sewage From Watercraft | | Alabama Code > Title 33 > Chapter 6A - Recreational Vessel And Residence Boat Sewage Discharges Regulated | | Alaska | Alaska Statutes Chapter 05.25 - Watercraft | | Alaska Statutes Chapter 30.30 - Abandoned And Derelict Vessels | | Arizona | Arizona Laws > Title 5 > Chapter 3 - Boating And Water Sports | | California | California Harbors and Navigation Code > Division 3 - Vessels | | California Harbors and Navigation Code > Division 4 - Masters, Crews And Cargoes | | California Harbors and Navigation Code > Division 5 - Pilots For Monterey Bay And The Bays Of San Francisco, San Pablo, And Suisun | | Connecticut | Connecticut General Statutes > Title 15 > Chapter 268 - Boating | | Delaware | Delaware Code Title 23 > Chapter 21 - Motorboats | | Delaware Code Title 23 > Chapter 22 - Boating Safety | | Delaware Code Title 23 > Chapter 23 - Operation Of A Vessel Or Boat While Under The Influence Of Intoxicating Liquor And/Or Drugs | | Delaware Code Title 23 > Chapter 24 - Exemptions From Civil Liability For Rendering Vessel Traffic Information Services | | Florida | Florida Statutes > Title XXIV - Vessels | | Florida Regulations Chapter 61B-60 - Yacht and Ship Brokers | | Florida Regulations > Division 68D - Vessel Registration and Boating Safety | | Idaho | Idaho Code Title 67 > Chapter 70 - Idaho Safe Boating Act | | Illinois | Illinois Compiled Statutes > 625 ILCS 45 - Boat Registration and Safety Act | | Indiana | Indiana Code > Title 9 > Article 31 - Watercraft Titling And Registration | | Indiana Code > Title 25 > Article 28 - Boat Pilots | | Kansas | Kansas Statutes > Chapter 32 > Article 11 - Boating And Water Activities | | Maine | Maine Revised Statutes > Title 10 > Chapter 204-B - Watercraft Manufacturers, Distributors And Dealers | | Maine Revised Statutes > Title 10 > Chapter 212-A - Maine Marina And Boatyard Storage Act | | Maine Revised Statutes > Title 10 > Chapter 627 - Vessels | | Maine Revised Statutes > Title 12 > Chapter 935 - Watercraft And Airmobiles | | Maine Revised Statutes Title 23 > Chapter 412 - Waterborne Transportation | | Massachusetts | Massachusetts General Laws > Part I > Title XIV > Chapter 90B - Motorboats And Other Vessels | | Michigan | Michigan Laws > Chapter 123 > Act 68 of 1957 - Regulation Of Houseboats | | Michigan Laws > Chapter 445 > Act 88 of 1989 - Watercraft And Outboard Motor Manufacturers, Distributors, And Dealers | | Minnesota | Minnesota Statutes Chapter 86B - Water Safety, Watercraft, and Watercraft Titling | | Missouri | Missouri Laws > Title XIX > Chapter 306 - Watercraft Regulation and Licensing--State Water Patrol | | Nevada | Nevada Revised Statutes > Chapter 488 - Watercraft | | New Hampshire | New Hampshire Revised Statutes > Chapter 270-A - Use Of Houseboats | | New Hampshire Revised Statutes > Chapter 270-B - Abandoned Boats | | New Hampshire Revised Statutes > Chapter 270-D - Boating And Water Safety On New Hampshire Public Waters | | New Hampshire Revised Statutes > Chapter 270-E - Vessel Registration And Numbering | | New Mexico | New Mexico Statutes Chapter 66 > Article 12 - Boating | | New Mexico Statutes Chapter 66 > Article 13 - Boating While Intoxicated | | New York | New York Laws - General Business > Article 38 - Vessel Dealer Agreements | | New York | New York Laws > General Business > Article 38 - Vessel Dealer Agreements | | North Carolina | North Carolina General Statutes Chapter 75A - Boating and Water Safety | | North Dakota | North Dakota Code > Chapter 20.1-13 - Boating Regulation | | North Dakota Code > Chapter 20.1-13.1 - Intoxication Testing of Boat Operators | | North Dakota Code > Chapter 20.1-17 - Aquatic Nuisance Species | | Ohio | Ohio Code > Title 15 > Chapter 1547 - Watercraft And Waterways | | Ohio Code > Title 15 > Chapter 1548 - Watercraft Certificates Of Title | | Ohio Code > Title 45 > Chapter 4585 - Actions Relating To Watercraft | | Oregon | Oregon Statutes > Title 61 - Small Watercraft | | Rhode Island | Rhode Island General Laws > Chapter 46-8. Registration of Outboard Motors | | Rhode Island General Laws > Chapter 46-9. Pilots – Rhode Island Sound, Narragansett Bay, Sakonnet River, and Tributaries | | Rhode Island General Laws > Chapter 46-9.1. Pilots–Block Island Sound | | Rhode Island General Laws > Chapter 46-22. Regulation of Boats | | Rhode Island General Laws > Chapter 46-22.1. Uniform Boat Title Act | | Rhode Island General Laws > Chapter 46-22.2. Alcohol Boating Safety Act | | Rhode Island General Laws > Chapter 46-27. Personal Watercraft Safety Act | | South Carolina | South Carolina Code > Title 29 > Chapter 9 - Liens On Ships And Vessels | | South Carolina Code > Title 50 > Chapter 21 - Equipment And Operation Of Watercraft | | South Carolina Code > Title 50 > Chapter 23 - Watercraft And Outboard Motors | | South Carolina Code > Title 50 > Chapter 25 - Boating And Surfing At Particular Localities | | South Dakota | South Dakota Laws > Title 32 > Chapter 03A - Title, Registration And Taxation Of Boats | | South Dakota Laws > Title 32 > Chapter 07B - Regulation Of Boat Dealers | | South Dakota Laws > Title 42 > Chapter 8 - Watercraft | | Tennessee | Tennessee Code > Title 69 > Chapter 9 - Boating Regulation | | Texas | Texas Civil Statutes > Title 132 > Chapter 19 - Boat Or Motor Manufacturers, Distributors, And Dealers | | Utah | Utah Code > Title 73 > Chapter 18 - State Boating Act | | Utah Code > Title 73 > Chapter 18 - Boating - Litter and Pollution Control | | Utah Code > Title 73 > Chapter 18 - Water Safety | | Utah Code > Title 73 > Chapter 18 - Financial Responsibility of Motorboat Owners and Operators Act | | Vermont | Vermont Statutes > Title 25 > Chapter 1 - Operation of Vessels | | Virginia | Virginia Code Title 29.1 > Chapter 7 - Boating Laws | | Virginia Code Title 29.1 > Chapter 8 - Watercraft Dealer Licensing Act | | Virginia Code Title 62.1 > Chapter 18 - Protection of Aids to Navigation | | Wisconsin | Wisconsin Statutes > Chapter 30 > Subchapter V - Regulation Of Boating |
 |
|
|
Email
Print