40 CFR 98.56 – Data reporting requirements
In addition to the information required by § 98.3(c), each annual report must contain the information specified in paragraphs (a) through (n) of this section at the facility level.
(a) Annual process N
(b)-(c) [Reserved]
(d) Annual process N
(e) Number of abatement technologies (if applicable).
(f) Types of abatement technologies used and date of installation for each (if applicable).
(g) Abatement technology destruction efficiency for each abatement technology (percent destruction).
(h) Abatement utilization factor for each abatement technology (fraction of annual production that abatement technology is operating).
(i) Number of times in the reporting year that missing data procedures were followed to measure adipic acid production (months).
(j) If you conducted a performance test and calculated a site-specific emissions factor according to § 98.53(a)(1), each annual report must also contain the information specified in paragraphs (j)(1) through (7) of this section for each adipic acid production unit.
(1) [Reserved]
(2) Test method used for performance test.
(3) [Reserved]
(4) N
(5) Volumetric flow rate per test run during performance test (dscf/hr).
(6) Number of test runs.
(7) Number of times in the reporting year that a performance test had to be repeated (number).
(k) If you requested Administrator approval for an alternative method of determining N
(1) Name of alternative method.
(2) Description of alternative method.
(3) Request date.
(4) Approval date.
(l) Fraction control factor for each abatement technology (percent of total emissions from the production unit that are sent to the abatement technology) if equation E-3c is used.
(m) If only cyclohexane is oxidized to produce adipic acid and the quantity is known, report the information specified in paragraph (m)(1) of this section. If materials other than cyclohexane are oxidized to produce adipic acid, report the information specified in paragraph (m)(2) of this section.
(1) Annual quantity of cyclohexane (tons) used to produce adipic acid.
(2) Annual quantity of cyclohexanone and cyclohexanol mixture (tons) used to produce adipic acid.
(n) Annual percent N