40 CFR 98.86 – Data reporting requirements
In addition to the information required by § 98.3(c), each annual report must contain the information specified in paragraphs (a) and (b) of this section, as appropriate.
(a) If a CEMS is used to measure CO
(1) Monthly clinker production from each kiln at the facility.
(2) Annual facility cement production.
(3) Number of kilns and number of operating kilns.
(b) If a CEMS is not used to measure CO
(1) Kiln identification number.
(2) [Reserved]
(3) Annual cement production at the facility.
(4) Number of kilns and number of operating kilns.
(5)-(6) [Reserved]
(7) Method used to determine non-calcined CaO and non-calcined MgO in clinker.
(8) [Reserved]
(9) Method used to determine non-calcined CaO and non-calcined MgO in CKD.
(10) [Reserved]
(11) Quarterly kiln-specific CKD CO
(12) [Reserved]
(13) Name of raw kiln feed or raw material.
(14) Number of times missing data procedures were used to determine the following information:
(i) Clinker production (number of months).
(ii) Carbonate contents of clinker (number of months).
(iii) Non-calcined content of clinker (number of months).
(iv) CKD not recycled to kiln (number of quarters).
(v) Non-calcined content of CKD (number of quarters)
(vi) Organic carbon contents of raw materials (number of times).
(vii) Raw material consumption (number of months).
(15) Method used to determine the monthly clinker production from each kiln.
(16) Annual clinker production (metric tons).
(17) Annual average clinker CO
(18) Annual average CKD CO