47 CFR 15.38 – Incorporation by reference
Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. § 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Federal Communications Commission (FCC) must publish a document in the
(a) American National Standards Institute (ANSI), 25 West 43rd Street, 4th Floor, New York, NY 10036; phone: (212) 642-4980; email info@ansi.org; website: https://webstore.ansi.org/.
(1) ANSI C63.17-2013, American National Standard for Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices, approved August 12, 2013; IBR approved for § 15.31.
(2) Third Edition of the International Special Committee on Radio Interference (CISPR), Pub. 22, Information Technology Equipment-Radio Disturbance Characteristics-Limits and Methods of Measurement, 1997; IBR approved for § 15.09.
(b) Cable Television Laboratories, Inc., 858 Coal Creek Circle, Louisville, Colorado 80027; phone: (303) 661-9100; website: www.cablelabs.com/.
(1) M-UDCP-PICS-I04-080225, Uni-Directional Cable Product Supporting M-Card: Multiple Profiles; Conformance Checklist: PICS, February 25, 2008; IBR approved for § 15.123(c).
(2) TP-ATP-M-UDCP-I05-20080304, Uni-Directional Digital Cable Products Supporting M-Card; M-UDCP Device Acceptance Test Plan, March 4, 2008; IBR approved for § 15.123(c).
(c) Consumer Technology Association (formerly Consumer Electronics Association), 1919 S. Eads St., Arlington, VA 22202; phone: (703) 907-7634; email: CTA@CTA.tech; website: www.cta.tech/.
(1) CEA-542-B, CEA Standard: Cable Television Channel Identification Plan, July 2003; IBR approved for § 15.118.
(2) CEA-766-A, U.S. and Canadian Region Rating Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory Information using ATSC A/65-A Program and System Information Protocol (PSIP), April 2001; IBR approved for § 15.120.
(3) EIA-608, Recommended Practice for Line 21 Data Service, 1994; IBR approved for § 15.120.
(4) EIA-744, Transport of Content Advisory Information Using Extended Data Service (XDS), 1997; IBR approved for § 15.120.
(5) Uni-Dir-PICS-I01-030903, Uni-Directional Receiving Device: Conformance Checklist: PICS Proforma, September 3, 2003; IBR approved for § 15.123(c).
(6) Uni-Dir-ATP-I02-040225, Uni-Directional Receiving Device, Acceptance Test Plan, February 25, 2004; IBR approved for § 15.123(c).
(d) European Telecommunications Standards Institute, 650 Route des Lucioles, F-06921 Sophia Antipolis Cedex, France; website: www.etsi.org/.
(1) ETSI EN 300 422-1 V1.4.2 (2011-08), Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 1: Technical characteristics and methods of measurement, Copyright 2011; IBR approved for § 15.236(g).
(2) [Reserved]
(e) Institute of Electrical and Electronic Engineers (IEEE), 3916 Ranchero Drive, Ann Arbor, MI 48108; phone: (800) 678-4333; email: stds-info@ieee.org; website: www.ieee.org/.
(1) ANSI C63.4-2014: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz, ANSI approved June 13, 2014; IBR approved for § 15.35(a).
(2) ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz, ANSI approved June 13, 2014 (excluding clauses 4.5.3, 4.6, 6.2.13, 8.2.2, 9, and 13); IBR approved for § 15.31(a).
(3) ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices, ANSI approved June 27, 2013; IBR approved for §§ 15.31(a); 15.37(s).
(4) ANSI C63.10-2020, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices, ANSI-approved September 10, 2020; IBR approved for §§ 15.31(a); 15.37(s).
(f) Society of Cable Telecommunications Engineers (SCTE), 140 Philips Rd., Exton, PA 19341; phone: (610) 363-6888; email: info@scte.org; website: www.scte.org.
(1) SCTE 28 2003 (formerly DVS 295): “Host-POD Interface Standard,” 2003; IBR approved for § 15.123.
(2) SCTE 40 2003 (formerly DVS 313): “Digital Cable Network Interface Standard,” 2003; IBR approved for § 15.123.
(3) SCTE 41 2003 (formerly DVS 301): “POD Copy Protection System,” 2003; IBR approved for § 15.123.
(4) ANSI/SCTE 54 2003 (formerly DVS 241): “Digital Video Service Multiplex and Transport System Standard for Cable Television,” 2003; IBR approved for § 15.123.
(5) ANSI/SCTE 65 2002 (formerly DVS 234): “Service Information Delivered Out-of-Band for Digital Cable Television,” 2002; IBR approved for § 15.123.
The standards listed in paragraphs (c) and (f) of this section are available from Accuris (formerly Global Engineering), 15 Inverness Way East, Englewood, CO 80112; phone: (800) 854-7179; website: https://global.ihs.com.
The standards listed in paragraphs (e) and (f) of this section are available from ANSI (see paragraph (a) of this section for contact information).