Kentucky Statutes 100.348 – Compatibility standards for manufactured homes — Definitions — Adoption of standards by local governments
Current as of: 2024 | Check for updates
|
Other versions
(1) The Kentucky General Assembly hereby recognizes and affirms that the protection of property values is a legitimate issue to local governments and the enactment of regulations designed to protect property values is a proper exercise of local government legislative power.
(2) As used in this section, unless the context requires otherwise:
(a) “Compatibility standards” means standards that have been enacted by a local government under the authority of this section for the purpose of protecting and preserving the monetary value of real property located within the local government’s jurisdiction;
(b) “Local government” means a city, county, urban-county government, charter county government, or consolidated local government that is engaged in planning and zoning under KRS Chapter 100;
(c) “Manufactured home” means a single-family residential dwelling constructed after June 15, 1976, in accordance with the National Manufactured Home Construction and Safety Standards Act of 1974, 42 U.S.C. § 5401, et seq., as amended, and designed to be used as a single-family residential dwelling with or without permanent foundation when connected to the required utilities, and which includes the plumbing, heating, air conditioning, and electrical systems contained therein;
(d) “Qualified manufactured home” means a manufactured home that meets all of the following criteria:
1. Is manufactured on or after July 15, 2002;
2. Is affixed to a permanent foundation and is connected to the appropriate facilities and is installed in compliance with KRS § 227.570;
3. Has a width of at least twenty (20) feet at its smallest width measurement or is two (2) stories in height and oriented on the lot or parcel so that its main entrance door faces the street;
4. Has a minimum total living area of nine hundred (900) square feet; and
5. Is not located in a manufactured home land-lease community; and
(e) “Permanent foundation” means a system of supports that is:
1. Capable of transferring, without failure, into soil or bedrock, the maximum design load imposed by or upon the structure;
2. Constructed of concrete; and
3. Placed at a depth below grade adequate to prevent frost damage.
(3) Any local government may adopt and enforce, as a part of its zoning regulations, compatibility standards governing the placement of qualified manufactured homes in residential zones within the local government’s jurisdiction. Compatibility standards shall be adopted, amended, and enforced in the same manner as other zoning regulations and shall be in addition to any zoning regulations that are generally applicable to single-family residences. The compatibility standards shall
be designed to ensure that when a qualified manufactured home is placed in a residential zone it is compatible, in terms of assessed value, with existing housing located with a one-eighth (1/8) mile or less radius from the proposed location of the qualified manufactured home. The compatibility standards adopted by a local government shall relate to architectural features that have a significant impact on the overall assessed value of the structure, including, for example, but not limited to features such as:
(a) Roof pitch;
(b) Square footage of livable space;
(c) Type and quality of exterior finishing materials; (d) Foundation skirting; and
(e) Existence and type of attached structures.
(4) Nothing in this section shall be construed to affect, modify, or abolish restrictions contained in recorded deeds, covenants, or developers’ subdivision restrictions.
(5) Nothing in this section shall be construed as limiting in any way the authority of local governments to adopt regulations designed to protect historic properties or historic districts.
Effective: July 1, 2003
History: Created 2002 Ky. Acts ch. 337, sec. 1, effective July 1, 2003.
(2) As used in this section, unless the context requires otherwise:
Terms Used In Kentucky Statutes 100.348
- City: includes town. See Kentucky Statutes 446.010
- Jurisdiction: (1) The legal authority of a court to hear and decide a case. Concurrent jurisdiction exists when two courts have simultaneous responsibility for the same case. (2) The geographic area over which the court has authority to decide cases.
- Real property: Land, and all immovable fixtures erected on, growing on, or affixed to the land.
- Street: means any vehicular way. See Kentucky Statutes 100.111
- Structure: means anything constructed or made, the use of which requires permanent location in or on the ground or attachment to something having a permanent location in or on the ground, including buildings and signs. See Kentucky Statutes 100.111
- Subdivision: means the division of a parcel of land into three (3) or more lots or parcels except in a county containing a city with a population equal to or greater than eight thousand (8,000) based upon the most recent federal decennial census or in an urban-county government or consolidated local government where a subdivision means the division of a parcel of land into two (2) or more lots or parcels. See Kentucky Statutes 100.111
(a) “Compatibility standards” means standards that have been enacted by a local government under the authority of this section for the purpose of protecting and preserving the monetary value of real property located within the local government’s jurisdiction;
(b) “Local government” means a city, county, urban-county government, charter county government, or consolidated local government that is engaged in planning and zoning under KRS Chapter 100;
(c) “Manufactured home” means a single-family residential dwelling constructed after June 15, 1976, in accordance with the National Manufactured Home Construction and Safety Standards Act of 1974, 42 U.S.C. § 5401, et seq., as amended, and designed to be used as a single-family residential dwelling with or without permanent foundation when connected to the required utilities, and which includes the plumbing, heating, air conditioning, and electrical systems contained therein;
(d) “Qualified manufactured home” means a manufactured home that meets all of the following criteria:
1. Is manufactured on or after July 15, 2002;
2. Is affixed to a permanent foundation and is connected to the appropriate facilities and is installed in compliance with KRS § 227.570;
3. Has a width of at least twenty (20) feet at its smallest width measurement or is two (2) stories in height and oriented on the lot or parcel so that its main entrance door faces the street;
4. Has a minimum total living area of nine hundred (900) square feet; and
5. Is not located in a manufactured home land-lease community; and
(e) “Permanent foundation” means a system of supports that is:
1. Capable of transferring, without failure, into soil or bedrock, the maximum design load imposed by or upon the structure;
2. Constructed of concrete; and
3. Placed at a depth below grade adequate to prevent frost damage.
(3) Any local government may adopt and enforce, as a part of its zoning regulations, compatibility standards governing the placement of qualified manufactured homes in residential zones within the local government’s jurisdiction. Compatibility standards shall be adopted, amended, and enforced in the same manner as other zoning regulations and shall be in addition to any zoning regulations that are generally applicable to single-family residences. The compatibility standards shall
be designed to ensure that when a qualified manufactured home is placed in a residential zone it is compatible, in terms of assessed value, with existing housing located with a one-eighth (1/8) mile or less radius from the proposed location of the qualified manufactured home. The compatibility standards adopted by a local government shall relate to architectural features that have a significant impact on the overall assessed value of the structure, including, for example, but not limited to features such as:
(a) Roof pitch;
(b) Square footage of livable space;
(c) Type and quality of exterior finishing materials; (d) Foundation skirting; and
(e) Existence and type of attached structures.
(4) Nothing in this section shall be construed to affect, modify, or abolish restrictions contained in recorded deeds, covenants, or developers’ subdivision restrictions.
(5) Nothing in this section shall be construed as limiting in any way the authority of local governments to adopt regulations designed to protect historic properties or historic districts.
Effective: July 1, 2003
History: Created 2002 Ky. Acts ch. 337, sec. 1, effective July 1, 2003.