41-1a-204.  Identification number inspection.

(1)  An application for first registration in this state of any vehicle may not be accepted by the division unless the identification number of that vehicle, other than new vehicles sold by dealers licensed in this state, has been inspected by a qualified identification number inspector under 8.

Terms Used In Utah Code 41-1a-204

  • Division: means the Motor Vehicle Division of the commission, created in Section 41-1a-106. See Utah Code 41-1a-102
  • Identification number: includes a vehicle identification number, state assigned identification number, hull identification number, and motor serial number. See Utah Code 41-1a-102
  • Park model recreational vehicle: means a unit that:
(a) is designed and marketed as temporary living quarters for recreational, camping, travel, or seasonal use;
(b) is not permanently affixed to real property for use as a permanent dwelling;
(c) requires a special highway movement permit for transit; and
(d) is built on a single chassis mounted on wheels with a gross trailer area not exceeding 400 square feet in the setup mode. See Utah Code 41-1a-102
  • Registration: means a document issued by a jurisdiction that allows operation of a vehicle or vessel on the highways or waters of this state for the time period for which the registration is valid and that is evidence of compliance with the registration requirements of the jurisdiction. See Utah Code 41-1a-102
  • State: when applied to the different parts of the United States, includes a state, district, or territory of the United States. See Utah Code 68-3-12.5
  • Vehicle: includes a motor vehicle, trailer, semitrailer, off-highway vehicle, camper, park model recreational vehicle, manufactured home, and mobile home. See Utah Code 41-1a-102
    • (2)  A park model recreational vehicle is exempt from this section.

    Amended by Chapter 237, 2014 General Session

      Previous section
    Next section  
     Part 2 Contents