Delaware Code Title 16 Sec. 8602 – Labeling required
(a) Each type of safety glazing material manufactured, distributed, imported or sold for use in hazardous locations or installed in such a location within the State shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material on the safety glazing material or by other suitable means. The label shall identify the labeler, whether manufacturer, fabricator or installer, and the nominal thickness and the type of safety glazing material and the fact that said material meets the test requirements of the current American National Standard Institute Standard Z-97.1 and such further requirements as may be adopted by the building inspector of the county in which the construction is done. The label must be legible and visible after installation.
Terms Used In Delaware Code Title 16 Sec. 8602
- Safety glazing material: means any glazing material, such as tempered glass, laminated glass, wire glass or rigid plastic, which meets the test requirements of the current American National Standards Institute Standard Z-97. See Delaware Code Title 16 Sec. 8601
- State: means the State of Delaware; and when applied to different parts of the United States, it includes the District of Columbia and the several territories and possessions of the United States. See Delaware Code Title 1 Sec. 302
(b) Such safety glazing labeling shall not be used on other than safety glazing materials.
16 Del. C. 1953, § ?8602; 58 Del. Laws, c. 90.;