As used in this part, the term:
(1) “Architect” or “registered architect” means a natural person who is licensed under this part to engage in the practice of architecture.
(2) “Architecture” means the rendering or offering to render services in connection with the design and construction of a structure or group of structures which have as their principal purpose human habitation or use, and the utilization of space within and surrounding such structures. These services include planning, providing preliminary study designs, drawings and specifications, job-site inspection, and administration of construction contracts.
(3) “Board” means the Board of Architecture and Interior Design.
(4) “Business organization” means a partnership, a limited liability company, a corporation, or an individual operating under a fictitious name.
(5) “Certificate of registration” means a license or registration issued by the department to a natural person to engage in the practice of architecture or interior design.
(6) “Common area” means an area that is held out for use by all tenants or owners in a multiple-unit dwelling, including, but not limited to, a lobby, elevator, hallway, laundry room, clubhouse, or swimming pool.
(7) “Department” means the Department of Business and Professional Regulation.
(8) “Diversified interior design experience” means experience which substantially encompasses the various elements of interior design services set forth under the definition of “interior design” in subsection (10).
(9) “Interior decorator services” includes the selection or assistance in selection of surface materials, window treatments, wallcoverings, paint, floor coverings, surface-mounted lighting, surface-mounted fixtures, and loose furnishings not subject to regulation under applicable building codes.
(10) “Interior design” means designs, consultations, studies, drawings, specifications, and administration of design construction contracts relating to nonstructural interior elements of a building or structure. “Interior design” includes, but is not limited to, reflected ceiling plans, space planning, furnishings, and the fabrication of nonstructural elements within and surrounding interior spaces of buildings. “Interior design” specifically excludes the design of or the responsibility for architectural and engineering work, except for specification of fixtures and their location within interior spaces. As used in this subsection, “architectural and engineering interior construction relating to the building systems” includes, but is not limited to, construction of structural, mechanical, plumbing, heating, air-conditioning, ventilating, electrical, or vertical transportation systems, or construction which materially affects lifesafety systems pertaining to firesafety protection such as fire-rated separations between interior spaces, fire-rated vertical shafts in multistory structures, fire-rated protection of structural elements, smoke evacuation and compartmentalization, emergency ingress or egress systems, and emergency alarm systems.
(11) “Nonstructural element” means an element which does not require structural bracing and which is something other than a load-bearing wall, load-bearing column, or other load-bearing element of a building or structure which is essential to the structural integrity of the building.
(12) “Reflected ceiling plan” means a ceiling design plan which is laid out as if it were projected downward and which may include lighting and other elements.
(13) “Registered interior designer” means a natural person who holds a valid certificate of registration to practice interior design.
(14) “Responsible supervising control” means the exercise of direct personal supervision and control throughout the preparation of documents, instruments of service, or any other work requiring the seal and signature of a licensee under this part.
(15) “Space planning” means the analysis, programming, or design of spatial requirements, including preliminary space layouts and final planning.
(16) “Townhouse” is a single-family dwelling unit not exceeding three stories in height which is constructed in a series or group of attached units with property lines separating such units. Each townhouse shall be considered a separate building and shall be separated from adjoining townhouses by the use of separate exterior walls meeting the requirements for zero clearance from property lines as required by the type of construction and fire protection requirements; or shall be separated by a party wall; or may be separated by a single wall meeting the following requirements:
(a) Such wall shall provide not less than 2 hours of fire resistance. Plumbing, piping, ducts, or electrical or other building services shall not be installed within or through the 2-hour wall unless such materials and methods of penetration have been tested in accordance with the Standard Building Code.
Terms Used In Florida Statutes 481.203
- Architecture: means the rendering or offering to render services in connection with the design and construction of a structure or group of structures which have as their principal purpose human habitation or use, and the utilization of space within and surrounding such structures. See Florida Statutes 481.203
- Board: means the Board of Architecture and Interior Design. See Florida Statutes 481.203
- Certificate of registration: means a license or registration issued by the department to a natural person to engage in the practice of architecture or interior design. See Florida Statutes 481.203
- Corporation: A legal entity owned by the holders of shares of stock that have been issued, and that can own, receive, and transfer property, and carry on business in its own name.
- Department: means the Department of Business and Professional Regulation. See Florida Statutes 481.203
- Interior design: includes , but is not limited to, reflected ceiling plans, space planning, furnishings, and the fabrication of nonstructural elements within and surrounding interior spaces of buildings. See Florida Statutes 481.203
- Partnership: A voluntary contract between two or more persons to pool some or all of their assets into a business, with the agreement that there will be a proportional sharing of profits and losses.
- person: includes individuals, children, firms, associations, joint adventures, partnerships, estates, trusts, business trusts, syndicates, fiduciaries, corporations, and all other groups or combinations. See Florida Statutes 1.01
- Space planning: means the analysis, programming, or design of spatial requirements, including preliminary space layouts and final planning. See Florida Statutes 481.203
- Townhouse: is a single-family dwelling unit not exceeding three stories in height which is constructed in a series or group of attached units with property lines separating such units. See Florida Statutes 481.203
(b) Such wall shall extend from the foundation to the underside of the roof sheathing, and the underside of the roof shall have at least 1 hour of fire resistance for a width not less than 4 feet on each side of the wall.
(c) Each dwelling unit sharing such wall shall be designed and constructed to maintain its structural integrity independent of the unit on the opposite side of the wall.