Iowa Code 215.14 – Approval by department
Current as of: 2023 | Check for updates
|
Other versions
A commercial weighing and measuring device shall not be installed in this state unless approved by the department.
1. A pit type scale or any other scale installed in a pit, regardless of capacity, that is installed on or after July 1, 1990, shall have a clearance of not less than four feet from the finished floor line of the scale to the bottom of the “I” beam of the scale bridge. Livestock shall not be weighed on any scale other than a livestock scale or pit type scale.
Terms Used In Iowa Code 215.14
- Commercial weighing and measuring device: includes a public scale or a commercial scanner. See Iowa Code 215.1
- Department: means the department of agriculture and land stewardship. See Iowa Code 215.1
- Livestock: means cattle, sheep, swine, ostriches, rheas, emus, poultry, and other animals or fowl, which are being produced primarily for use as food or food products for human consumption. See Iowa Code 172D.1
- state: when applied to the different parts of the United States, includes the District of Columbia and the territories, and the words "United States" may include the said district and territories. See Iowa Code 4.1
- United States: includes all the states. See Iowa Code 4.1
2. An electronic pitless scale shall be placed on concrete footings with concrete floor. The concrete floor shall allow for adequate drainage away from the scale as required by the department. There shall be a clearance of not less than eight inches between the weigh bridge and the concrete floor to facilitate inspection and cleaning.
3. Before approval by the department, the specifications for a commercial weighing and measuring device shall be furnished to the purchaser of the device by the manufacturer. The approval shall be based upon the recommendation of the United States national institute of standards and technology.