Florida Regulations 62C-36.004: Document Format and Standards
Current as of: 2024 | Check for updates
|
Other versions
(1) All notices, conceptual plans, conceptual plan changes, and reports shall be submitted using the forms incorporated by reference in Fl. Admin. Code R. 62C-36.014 Standardized forms are needed to assure that all requests that require agency action are handled in an efficient and expeditious manner. Additional pages needed to complete each form shall conform to the standards in this section. The operator shall submit a copy of each form and its attachments.
(2) All copies of documents shall be of good quality and clearly legible.
(3) At least one copy of all documents that are to be signed shall bear an original signature.
(4) All documents submitted on paper shall be submitted in an 8 1/2 by 11-inch format with a minimum margin of one inch on all sides. Original maps, drawings, and cross sections may be larger than 8 1/2 by 11 inches, but no larger than 30 by 40 inches. Copies of such oversized documents shall be available in both the original scale and the 8 1/2 by 11-inch format.
(5) All maps, drawings, and cross sections shall be of a scale suitable to show the required information. Original map scales shall be no smaller than one inch equals 500 feet, except for the required 1:24,000 topographic maps.
(6) All maps, drawings, and cross sections shall include at least the following information:
(a) Titles that explain their purpose.
(b) Legends that explain all symbols and patterns used.
(c) Scales, where appropriate. Scale bars shall be provided at a minimum.
(d) Location, where appropriate, including sections, townships, ranges, and counties. Maps or plan views shall include at least three fixed points referenced to section corners. When possible these points shall be section corners, but they should not be in a straight line. Cross sections shall have clearly defined end points that shall be located accurately on an inset or other map.
(e) North arrow, where appropriate.
Rulemaking Authority 378.404, 378.501 FS. Law Implemented 378.404, 378.501 FS. History-New 7-16-87, Formerly 16C-36.004, Amended 5-9-13.
(2) All copies of documents shall be of good quality and clearly legible.
(3) At least one copy of all documents that are to be signed shall bear an original signature.
(4) All documents submitted on paper shall be submitted in an 8 1/2 by 11-inch format with a minimum margin of one inch on all sides. Original maps, drawings, and cross sections may be larger than 8 1/2 by 11 inches, but no larger than 30 by 40 inches. Copies of such oversized documents shall be available in both the original scale and the 8 1/2 by 11-inch format.
(5) All maps, drawings, and cross sections shall be of a scale suitable to show the required information. Original map scales shall be no smaller than one inch equals 500 feet, except for the required 1:24,000 topographic maps.
(6) All maps, drawings, and cross sections shall include at least the following information:
(a) Titles that explain their purpose.
(b) Legends that explain all symbols and patterns used.
(c) Scales, where appropriate. Scale bars shall be provided at a minimum.
(d) Location, where appropriate, including sections, townships, ranges, and counties. Maps or plan views shall include at least three fixed points referenced to section corners. When possible these points shall be section corners, but they should not be in a straight line. Cross sections shall have clearly defined end points that shall be located accurately on an inset or other map.
(e) North arrow, where appropriate.
Rulemaking Authority 378.404, 378.501 FS. Law Implemented 378.404, 378.501 FS. History-New 7-16-87, Formerly 16C-36.004, Amended 5-9-13.