(1) 

Terms Used In Utah Code 15A-1-303

  • Building: means a structure used or intended for supporting or sheltering any use or occupancy and any improvements attached to it. See Utah Code 15A-1-202
  • Code: means :
(a) the State Construction Code; or
(b) an approved code. See Utah Code 15A-1-202
  • Construction code: means standards and specifications published by a nationally recognized code authority for use in circumstances described in Subsection 15A-1-204(1), including:
    (a) a building code;
    (b) an electrical code;
    (c) a residential one and two family dwelling code;
    (d) a plumbing code;
    (e) a mechanical code;
    (f) a fuel gas code;
    (g) an energy conservation code;
    (h) a swimming pool and spa code; and
    (i) a manufactured housing installation standard code. See Utah Code 15A-1-202
  • Local regulator: is a s defined in Section 15A-1-202. See Utah Code 15A-1-302
  • Manufactured home: means a transportable factory built housing unit constructed on or after June 15, 1976, according to the HUD Code, in one or more sections, that:
    (a) in the traveling mode, is eight body feet or more in width or 40 body feet or more in length, or when erected on site, is 400 or more square feet; and
    (b) is built on a permanent chassis and designed to be used as a dwelling with or without a permanent foundation when connected to the required utilities, and includes the plumbing, heating, air-conditioning, and electrical systems. See Utah Code 15A-1-302
  • Mobile home: means a transportable factory built housing unit built before June 15, 1976, in accordance with a state mobile home code which existed prior to the HUD Code. See Utah Code 15A-1-302
  • State: when applied to the different parts of the United States, includes a state, district, or territory of the United States. See Utah Code 68-3-12.5
  • State Construction Code: means the State Construction Code adopted by:
    (a) Chapter 2, Adoption of State Construction Code;
    (b) Chapter 2a, Tall Wood Buildings of Mass Timber Construction Incorporated as Part of State Construction Code;
    (c) Chapter 3, Statewide Amendments Incorporated as Part of State Construction Code;
    (d) Chapter 4, Local Amendments Incorporated as Part of State Construction Code; and
    (e) Chapter 6, Additional Construction Requirements. See Utah Code 15A-1-102
    (a)  A manufactured home constructed, sold, or setup in the state shall be constructed in accordance with the HUD Code.

    (b)  A manufactured home setup in the state shall be installed in accordance with the provisions of the State Construction Code applicable to manufactured housing installation.

    (c)  A local regulator subdivision has the authority and responsibility to issue a building permit for the modification or setup of a manufactured home within that political subdivision.

    (d)  A local regulator shall conduct the inspection of a modification to or the setup of a manufactured home and give an approval within the political subdivision in which the modification or setup takes place.

    (e)  A manufactured home constructed on or after June 15, 1976, shall be identifiable by the manufacturer’s data plate bearing the date the unit was manufactured and a HUD label attached to the exterior of the home certifying the home was manufactured to HUD standards.
  • (2) 

    (a)  A mobile home sold or setup in the state shall be constructed in accordance with the portions of the State Construction Code applicable to a mobile home at the time the mobile home was constructed.

    (b)  A mobile home setup in the state shall be installed in accordance with the portions of the State Construction Code applicable to manufactured housing installation.

    (c)  A local regulator has the authority and responsibility to issue a building permit for the setup of a mobile home within that political subdivision.

    (d)  A local regulator shall conduct the inspection of a modification to or the setup of a mobile home and give the approvals given by the local regulator within the political subdivision in which the modification or setup takes place.

    Enacted by Chapter 14, 2011 General Session