Utah Code 58-22-102. Definitions
Current as of: 2023 | Check for updates
|
Other versions
58-22-102. Definitions.
In addition to the definitions in Section 58-1-102, as used in this chapter:
In addition to the definitions in Section 58-1-102, as used in this chapter:
(1) | “Board” means the Professional Engineers and Professional Land Surveyors Licensing Board created in Section 58-22-201. |
(2) | “Building” means a structure which has human occupancy or habitation as its principal purpose, and includes the structural, mechanical, and electrical systems, utility services, and other facilities required for the building, and is otherwise governed by the State Construction Code or an approved code under Title 15A, State Construction and Fire Codes Act. |
(4) | “EAC/ABET” means the Engineering Accreditation Commission/Accreditation Board for Engineering and Technology. |
(5) | “Fund” means the Professional Engineer, Professional Structural Engineer, and Professional Land Surveyor Education and Enforcement Fund created in Section 58-22-103. |
(6) | “NCEES” means the National Council of Examiners for Engineering and Surveying. |
(7) | “Principal” means a licensed professional engineer, professional structural engineer, or professional land surveyor having responsible charge of an organization’s professional engineering, professional structural engineering, or professional land surveying practice. |
(8) | “Professional engineer” means a person licensed under this chapter as a professional engineer. |
(9) |
|
(10) | “Professional engineering intern” means a person who:
|
(11) | “Professional land surveying” or “the practice of land surveying” means a service or work, the adequate performance of which requires the application of special knowledge of the principles of mathematics, the related physical and applied sciences, and the relevant requirements of law for adequate evidence to the act of measuring and locating lines, angles, elevations, natural and man-made features in the air, on the surface of the earth, within underground workings, and on the beds of bodies of water for the purpose of determining areas and volumes, for the monumenting or locating of property boundaries or points controlling boundaries, and for the platting and layout of lands and subdivisions of lands, including the topography, alignment and grades of streets, and for the preparation and perpetuation of maps, record plats, field notes records, and property descriptions that represent these surveys and other duties as sound surveying practices could direct. |
(12) | “Professional land surveyor” means an individual licensed under this chapter as a professional land surveyor. |
(13) | “Professional structural engineer” means a person licensed under this chapter as a professional structural engineer. |
(14) |
|
(15) | “Structure” means that which is built or constructed, an edifice or building of any kind, or a piece of work artificially built up or composed of parts joined together in a definite manner, and as otherwise governed by the State Construction Code or an approved code under Title 15A, State Construction and Fire Codes Act. |
(16) | “Supervision” means that a licensed professional engineer, professional structural engineer, or professional land surveyor is responsible for and personally reviews, corrects when necessary, and approves work performed by an employee, subordinate, associate, or drafter under the direction of the licensee, and may be further defined by rule by the division in collaboration with the board. |
(17) | “TAC/ABET” means the Technology Accreditation Commission/Accreditation Board for Engineering and Technology. |
(18) | “Unlawful conduct” means the same as that term is defined in Sections 58-1-501 and 58-22-501. |
(19) | “Unprofessional conduct” means the same as that term is defined in Sections 58-1-501 and 58-22-502.5 . |
Amended by Chapter 415, 2022 General Session