(a) Cities and counties shall require, prior to the approval of a project located in a seismic hazard zone, a geotechnical report defining and delineating any seismic hazard. If the city or county finds that no undue hazard of this kind exists, based on information resulting from studies conducted on sites in the immediate vicinity of the project and of similar soil composition to the project site, the geotechnical report may be waived. After a report has been approved or a waiver granted, subsequent geotechnical reports shall not be required, provided that new geologic datum, or data, warranting further investigation is not recorded. Each city and county shall submit one copy of each approved geotechnical report, including the mitigation measures, if any, that are to be taken, to the State Geologist within 30 days of its approval of the report.

(b) In meeting the requirements of this section, cities and counties shall consider the policies and criteria established pursuant to this chapter. If a project’s approval is not in accordance with the policies and criteria, the city or county shall explain the reasons for the differences in writing to the State Geologist, within 30 days of the project’s approval.

Terms Used In California Public Resources Code 2697

  • county: includes the City and County of San Francisco. See California Public Resources Code 2693
  • Geotechnical report: means a report prepared by a certified engineering geologist or a civil engineer practicing within the area of his or her competence, which identifies seismic hazards and recommends mitigation measures to reduce the risk of seismic hazard to acceptable levels. See California Public Resources Code 2693
  • Mitigation: means those measures that are consistent with established practice and that will reduce seismic risk to acceptable levels. See California Public Resources Code 2693

(Added by Stats. 1990, Ch. 1168, Sec. 3. Section operative April 1, 1991, pursuant to Section 2599.6 (later renumbered as 2699.6).)