Sec. 66.

(1) The condominium subdivision plan for each condominium project shall be prepared by an architect, land surveyor, or engineer licensed to practice and shall bear the signature and seal of such architect, land surveyor, or engineer. The condominium subdivision plan shall be reproductions of original drawings.

(2) A complete condominium subdivision plan shall include all of the following:

(a) A cover sheet.

(b) A survey plan.

(c) A floodplain plan, if the condominium lies within or abuts a floodplain area.

(d) A site plan.

(e) A utility plan.

(f) Floor plans.

(g) The size, location, area, and horizontal boundaries of each condominium unit.

(h) A number assigned to each condominium unit.

(i) The vertical boundaries and volume for each unit comprised of enclosed air space.

(j) Building sections showing the existing and proposed structures and improvements including their location on the land. Any proposed structure and improvement shown shall be labeled either “must be built” or “need not be built”. To the extent that a developer is contractually obligated to deliver utility conduits, buildings, sidewalks, driveways, landscaping and an access road, the same shall be shown and designated as “must be built”, but the obligation to deliver such items exists whether or not they are so shown and designated.

(k) The nature, location, and approximate size of the common elements.

(l) Other items the administrator requires by rule.

(3) Condominium subdivision plans shall be numbered consecutively when recorded by the register of deeds and shall be designated __________ county condominium subdivision plan number __________.

(4) The developer shall complete all structures and improvements labeled pursuant to subsection (2)(j) “must be built”.

History: 1978, Act 59, Eff. July 1, 1978 ;– Am. 1982, Act 538, Imd. Eff. Jan. 17, 1983 ;– Am. 1983, Act 113, Imd. Eff. July 12, 1983