South Carolina Code 40-22-270. Individual seals; stamping on plans and specifications
(1) Individual seals must be under the personal custody and control of the licensee and bear the licensee’s name, registration license number, and the legend "Professional Engineer" or "Professional Surveyor" except for licenses issued before July 1, 2001, which may have the legend "Registered Professional Engineer" or "Registered Land Surveyor". The seal also shall bear evidence of the license category for professional engineers and the tier designation for professional surveyors.
Terms Used In South Carolina Code 40-22-270
- Board: means the South Carolina State Board of Registration for Professional Engineers and Surveyors created pursuant to this chapter. See South Carolina Code 40-22-20
- Clerk of court: An officer appointed by the court to work with the chief judge in overseeing the court's administration, especially to assist in managing the flow of cases through the court and to maintain court records.
- Engineer: means a professional engineer as defined in this section. See South Carolina Code 40-22-20
- Evidence: Information presented in testimony or in documents that is used to persuade the fact finder (judge or jury) to decide the case for one side or the other.
- Firm: means a business entity functioning as a sole proprietorship, partnership, limited liability partnership, professional association, professional corporation, business corporation, limited liability company, joint venture, or other legally constituted organization which practices or offers to practice engineering or surveying, or both. See South Carolina Code 40-22-20
- Licensed: means authorized by this board, pursuant to the statutory powers delegated by the State to this board, to engage in the practice of engineering, or surveying, or engineering and surveying, as evidenced by the board's certificate issued to the registered license holder. See South Carolina Code 40-22-20
- Person: means an individual human being, firm, partnership, or corporation. See South Carolina Code 40-22-20
- Practice of engineering: means any service or creative work, the adequate performance of which requires engineering education, training, and experience in the application of special knowledge of the mathematical, physical, and engineering sciences to such services or creative work as commissioning, consultation, investigation, expert technical testimony, evaluation, design and design coordination of engineering works and systems, design for development and use of land and water, performing engineering surveys and studies, and the review of construction for the purpose of monitoring compliance with drawings and specifications, any of which embraces such services or work, either public or private, in connection with any utilities, structures, buildings, machines, equipment, processes, work systems projects, and industrial or consumer products or equipment of control systems, chemical, communications, mechanical, electrical, environmental, hydraulic, pneumatic, or thermal nature, insofar as they involve safeguarding life, health, or property, and including such other professional services as may be necessary to the planning, progress, and completion of any engineering services. See South Carolina Code 40-22-20
- Professional surveyor: means a licensee who is qualified to practice any discipline of TIER A or TIER B surveying in this State, as defined in this section and as attested by his license and registration as a TIER A or TIER B professional surveyor in this State. See South Carolina Code 40-22-20
(2) Seals for firms practicing under a certificate of authorization must bear the firm’s name and authorization number.
(3) Plans, specifications, plats, and reports prepared by a licensee or prepared under the licensee’s direct supervision must be stamped with seals when filed with public authorities during the life of the licensee’s certificate.
(4) Plans and specifications prepared by a licensee or prepared under the licensee’s direct supervision must be stamped with seals when issued for use as job site record documents at construction projects within this State.
(5) It is unlawful to seal documents with a seal after the certificate of the licensee or the certificate of authorization in the case of firms named on the seal has expired or has been revoked or suspended unless the certificate has been renewed, reissued, or reinstated.
(6) Where individual seals are affixed to plans, specifications, plats, and reports, the licensee shall affix his signature and date under or across the face and beyond the circumference of the seal. The signature and date must not be applied in a manner that obliterates or renders illegible the licensee’s license number or name.
(7) The clerk of court or the register of deeds for any county shall refuse to accept for filing or recording a map, plat, survey, or other document within the definition of surveying, dated after July 1, 1977, which does not have affixed to it the personal signature and prescribed impression seal of a professional surveyor. No charge may be made by a professional surveyor for the application of his impression seal.
(8) The building official, or other designated authority charged with the responsibility of issuing building or similar permits, shall refuse to issue a permit for any undertaking, the plans and specifications for which would require the seal of a professional engineer, unless the permit applicant has furnished satisfactory evidence that the documents were prepared by an engineer licensed as required by this chapter or that the documents are exempt from the requirements of this chapter. The building official, or designated authority charged with the responsibility of issuing building or similar permits, shall report to the board the name and address of a person who has or is suspected to have violated a provision of this chapter or a regulation promulgated pursuant to this chapter relating to the unlicensed practice of engineering.
(9) The seal and signature of a licensee certifies that the document was prepared by the licensee or his agent. For prototypical documents, the seal and signature of a licensee indicates that he has sufficiently reviewed the document and is able to fully coordinate and assume responsibility for application of the plans.