(a) An outdoor lighting fixture may be installed, replaced, maintained, or operated using state funds only if:
(1) the new or replacement outdoor lighting fixture is a cutoff luminaire if the rated output of the outdoor lighting fixture is greater than 1,800 lumens;
(2) the minimum illuminance adequate for the intended purpose is used with consideration given to nationally recognized standards;
(3) for lighting of a designated highway of the state highway system, the Texas Department of Transportation determines that the purpose of the outdoor lighting fixture cannot be achieved by the installation of reflective road markers, lines, warning or informational signs, or other effective passive methods; and
(4) full consideration has been given to energy conservation, reducing glare, minimizing light pollution, and preserving the natural night environment.
(b) For purposes of Subsection (a)(4), “energy conservation” means reducing energy costs and resources used and includes using a light with lower wattage or a timer switch.

Terms Used In Texas Health and Safety Code 425.002


(c) Subsection (a) does not apply if:
(1) a federal law, rule, or regulation preempts state law;
(2) the outdoor lighting fixture is used on a temporary basis because emergency personnel require additional illumination for emergency procedures;
(3) the outdoor lighting fixture is used on a temporary basis for nighttime work;
(4) special events or situations require additional illumination;
(5) the outdoor lighting fixture is used solely to enhance the aesthetic beauty of an object; or
(6) a compelling safety interest exists that cannot be addressed by another method.
(d) Special events or situations that may require additional illumination include sporting events and illumination of monuments, historic structures, or flags. Illumination for special events or situations must be installed to shield the outdoor lighting fixtures from direct view and to minimize upward lighting and light pollution.